Skip to main content

NEW YORKJuly 27, 2017 /PRNewswire-USNewswire/ — America Makes and the American National Standards Institute(ANSI) today announced the launch of phase 2 of the America Makes & ANSI Additive Manufacturing Standardization Collaborative (AMSC) with a kick-off meeting scheduled for September 7th in Philadelphia. Major goals of phase 2 include expanding the discussion of standards needs for polymers and other materials besides metals and engaging experts from other industry sectors such as automotive, heavy equipment, energy, consumer products, and tooling. A free webinar to provide an overview of the AMSC and how to prepare for the September 7th meeting will be held on August 17th from 2:00 – 3:00 pm EDT.

The AMSC was formed in March 2016 to coordinate and accelerate the development of industry-wide additive manufacturing standards and specifications. The overarching goal is to achieve a consistent, harmonized, and non-contradictory set of additive manufacturing standards. In February 2017, the AMSC published a Standardization Roadmap for Additive Manufacturing (Version 1.0). The roadmap describes the current standardization landscape for additive manufacturing, including published standards and standards in development. It also provides recommendations to address gaps where there is a perceived need for additional standardization work, including in many cases additional research and development activity. The document was largely developed by representatives from the aerospace and medical industries.

Since publication of the roadmap, America Makes and ANSI have been actively promoting the document at industry events and meeting with the standards developing organizations (SDOs) involved in the project to discuss their efforts to advance the roadmap’s recommendations. The introduction of new perspectives and expertise from other sectors during phase 2 will help to identify potentially overlooked gaps. In addition, updates on previously identified gaps will be a focus. The target date for publication of the roadmap version 2.0 is June 2018.

The AMSC meeting will be held from 9:00 a.m. – 5:00 p.m. EDT on September 7th at Penn State at The Philadelphia Navy Yard, 4960 South 12th Street, Penn State Building 661, Symposium Room, Philadelphia, PA. The draft agenda and logistical information are available on the AMSC website. Advance registration for both in-person ($30) and remote participation is required. Meeting participants should familiarize themselves with the roadmap in advance so they are prepared to contribute to the breakout group for their sector. Participation in the AMSC is open to additive manufacturing stakeholders that have operations in the U.S.

Jim Williams, president, All Points Additive, and chair of the AMSC commented: “We look forward to continuing the good collaboration among affected stakeholders that led to the development of the roadmap. We welcome newcomers to the process from other industry sectors and experts on polymers as we work to expand the content of the document to add value for all segments of industry that want to make use of additive manufacturing technologies.”

About America Makes

America Makes is the National Additive Manufacturing Innovation Institute. As the national accelerator for additive manufacturing (AM) and 3D printing (3DP), America Makes is the nation’s leading and collaborative partner in AM and 3DP technology research, discovery, creation, and innovation. Structured as a public-private partnership with member organizations from industry, academia, government, non-government agencies, and workforce and economic development resources, we are working together to innovate and accelerate AM and 3DP to increase our nation’s global manufacturing competitiveness. Based in Youngstown, Ohio, America Makes is the first institute for up to 45 manufacturing innovation institutes to follow and is driven by the NCDMM. For more information about America Makes, visit


The NCDMM delivers optimized manufacturing solutions that enhance the quality, affordability, maintainability, and rapid deployment of existing and yet-to-be developed systems. This is accomplished through collaboration with government, industry, and academic organizations to promote the implementation of best practices to key stakeholders through the development and delivery of disciplined training, advanced technologies, and methodologies. For additional information, visit the NCDMM at

About ANSI

The American National Standards Institute (ANSI) is a private non-profit organization whose mission is to enhance U.S. global competitiveness and the American quality of life by promoting, facilitating, and safeguarding the integrity of the voluntary standardization and conformity assessment system. Its membership is comprised of businesses, professional societies and trade associations, standards developers, government agencies, and consumer and labor organizations. The Institute represents the diverse interests of more than 125,000 companies and organizations and 3.5 million professionals worldwide. The Institute is the official U.S. representative to the International Organization for Standardization (ISO) and, via the U.S. National Committee, the International Electrotechnical Commission (IEC). For more information, visit

As seen on

Request Your Sample Parts Today

See and feel the future with our 3D printed sample parts.